Why the regular inspection of trailers for sale is important?

It is important to take good care of your things, to ensure they are in working condition for a long time. The same holds true for your vehicle as well. Every person relies on their vehicle for various purpose – whether it’s for daily commutes or to haul massive loads. It’s important to take your car or truck for regular inspection, to avoid an adverse situation like a tyre blowing off, brakes being jammed or anything else. In the inspection, different parts of the car are not only inspected but the working of equipment is also checked.

Its quite common for people to use trailers for hauling heavy machinery, construction materials or antique cars in Kent. It does not matter for what purpose the car trailers are used. The important point is that the vehicle doesn’t fall off the road when loaded with heavy materials. Thus, it’s important to get the trailers inspected at regular intervals, to avoid any damage to the belongings during the trip.

If you are looking to put your Trailer for sale in Kent, do following inspections as per regulation standards:

• Body

Some trailers have sharp edges which could be dangerous if not latched correctly. Experts check the attached doors and floor if it can withstand the load. The guides, pivots, rollers and flatbeds are checked thoroughly so they don’t flip.

• Brakes

Heavy vehicles should consist of a braking system on all four wheels. It should be able to hold the trailer in a standing position and control the movement. The braking system must be operable at the driver’s seat via hands or foot. The non-commercial trailer consists of surge brakes.

• Number plate

The number plate should be placed horizontally and fixed tightly. It should be fixed with white light and fully visible while carrying a load.

• Fenders

If the rear of equipment doesn’t protect from splashing water and dirt, then the trailer needs fenders. The height of the rear portion should be one-third or less.

• Frame

The trailer frame should support the intended load without flexing. The frame of hiking gear, heavy equipment or other vehicles should be strong for withstanding the weight. For risky areas, use fish plates and place them parallel to the ground.

• Hitch

The hitch is mounted to the towing vehicle adequately for the specific weight. Commercial hitches have markings on the balls to see whether they are compliant with weight.

• Reflectors
• Side markers and clearance lamps
• Stop lamps
• Turning indicators
• Safety chain
• Suspension
• Wiring
• Tyres

Before starting any trip, ensure that components such as tyres, brakes and suspension are thoroughly checked.

• Check the tyres for pressure and condition: Examine each tyre and amount of air pressure. Off-road equipment has different working pressures and also depends on the weighted trailer can carry.
• Investigate the bearings, trailer axle and wheel hubs: Jack up each wheel and if it is moving side-to-side then tighten the bearings. If the wheel rumbles, replace the bearings. Check axle is straight and centred to the spring.
• Inspect the braking system: Check if there is any wear or tear on the pads or shoes and make proper adjustments.

Once the inspection is completed, you can put up the trailer for sale and comply with the regulations of Kent.

Saxons Trailers is one of the leading full-service trailer providers in Kent. They offer other services such as repairs, customization, delivery, financing and tagging of car trailer in Kent.